Sprint iQ: Maximum performance in a small bench top footprint
Leak testing equipment with maximum performance in a small bench top footprint.
Ease of use and simple validation has led to the global success of Uson’s Sprint series of leak testers. Ideal for medical device leak testing, Sprint LC and Sprint iQ can perform 13 types of tests for devices such as catheters, tube sets and other medical products.
These bench top leak testers can be fully automated if required for the most demanding applications and are available in one, two, three or four channels to suit your needs. Simple to use, they allow for easy, fast setup and operation.
With thousands of units installed around the world, Sprint leak testers are the gold standard in the medical device leak testing industry.
Ideal for the medical industry, the Sprint iQ can perform 13 types of tests for devices such as catheters, tube sets and other medical products.
Medical Device Leak Testing with Up to four channels
These bench top leak testers can be fully automated if required for the most demanding applications and are available in one, two, three or four channels. Simple to use, they allow for easy, fast setup and operation.
A clear leader in the medical device category
With thousands of units installed around the world, Sprint leak testers are the gold standard in the medical device leak testing industry.
Sprint iQ Specifications
Sprint iQ
Notes
Industrial
Packaging
Medical
Automotive
Max Channels – Design
4
Channel Operating Modes
Sprint iQ
Notes
Synchronous
Independent
Inputs/Outputs
Sprint iQ
Notes
Max Decision Sensors / tester
4
0 to 5 VDC max
Max Sensors / channel
1*
*Single channel combination pressure / crack and pressure / flow testers have two sensors.
A/D resolution (bits)
24
High resolution for greater accuracy.
Max Analog Outputs / tester
1
0 to 10 VDC
Max Analog Outputs / channel
1
Analog Output bits
PWM (~12)
Pulse width modulation (PWM)
Maximum 24V DC discrete digital inputs /
11*
*Requires PLC Interface
Valve Control Signals / tester
18
Configure and control complex pneumatic circuits
Maximum discrete digital outputs /
11 (not standard, per configuration)
Up to 11 outputs for PLC control.
Discrete digital outputs / channel
2
Pass / Fail outputs.
Two-handed start support (software based)
Valuable safety feature for semi automated systems.
Digital I/O Voltage Level
24 vdc
Communication Interfaces
Sprint iQ
Notes
RS-232 ports / tester
1
Connect to remote PC via serial port and receive serial string commands.
Host USB 2.0 ports
2
Device USB ports
1
Local Area Network Support
Sprint iQ
Notes
RJ 45 Ethernet ports
1
Connect to a network.
Logging to a networked disk
Via FTP
Physical Characteristics
Sprint iQ
Notes
Size (H*W*D) Inches
9 x 12 x 15
Weight lbs
18
Color Display size
5.8″
Color Display pixels
320 x 240
Front-panel membrane buttons
6
Front-panel run / program key
Front panel start/abort buttons
Integrated pneumatics
Expandable pneumatics chassis
Test Ports
4
Calibration Ports
Combined with Test Ports
Test port style
1/8 NPT Female
Pendant Style Remote Control
Remote control via pendant – useful for when the unit is caged or access is controlled.
Sensor Types
Sprint iQ
Notes
Pressure
Mass flow
Test Techniques / Step Types
Sprint iQ
Notes
Measure
Most common test techniques supported for a tester with integral pneumatic circuit.
Pressure Decay with optional comp & optional cal from vacuum to 500PSI
Mass Flow with optional comp & optional cal From 0 to 20 slpm
Vacuum decay
Sealed component test (a.k.a., Metered Chamber Test)
Leak testing equipment with maximum performance in a small bench top footprint.
